-
Shipping Containers
- Container Parts
- Roof Panel
- Side Panel
- Front End Panel
- Door Panel
- Front Corner Post
- Rear Corner Post (Outer/Inner)
- Cross Member
- Bottom Side Rail
- Top Side Rail
- Door Sill
- Front Bottom Rail
- Top End Rail
- Door Header Upper/Lower
- Door Rail
- Floor Spacer
- Angle
- Top/Bottom End Rail
- Door Edge Member
- Door Sealing
- Door Frame Profile
- Door Lining
- Door Hardwares
- Door Gasket
- Side Panel/Lining
- T-Floor
- Roof Panel/Lining
- Cross Member
- Bottom Side Rail
- Top Side Rail
- Ledge PVC
- Kazoo Drain
- Auto Drain
- Alu Tube
- Auto Drain Center Part
- PVC Drain Pipe
- PVC Plugs f. Drain with Ring and Steel Wire
- Door Screw
- Door Screw Nut
- Door Screw Rubber
- Tapping Screw
- Stainless Blind Rivet
- Lashing Ring
- CSC Plate
- Welding Wire
- Tapping Screw Bit
- Vehicle Parts
- Logistic Tools
- Lashing Tools
- Personal Protective Equipment
Container PartsWhat is the Inspection of Containers?Dec 08,2023In general, prior to transportation, safety officers visually inspect the condition of shipping containers using the seven-point visual inspection method. They will pay attention to the condition of these components: the door, undercarriage, floor, front wall, roof, left and right sides of the container. It is used to assess the structural integrity of containers and guarantee the safe transport of cargo, which could help prevent damages that can lead to more serious problems and incidents.
The inspection checklist can vary depending on the business or companies, but its contents are generally quite similar. In addition, insurance companies are now making industry and regulatory agencies pay more attention to "cargo integrity".
The order of the seven-point inspection may be determined by the actual business of different companies, mainly using visual inspection and related tools:
- Front Wall:
- Ensure that all corner blocks are visible and in good condition. The front wall should be corrugated.
- Measure the internal dimensions of the container using a ruler to match the specification.
- Confirm that the ventilation port is visible and not obstructed by foreign objects.
- Tap the front wall with the hammer to ensure a hollow sound.
- Left Side:
- Examine if there will be the internal and external repairs visible on the side wall.
- Check for any abnormal repairs on the cross members or rails.
- Tap the left wall with a small hammer to ensure a hollow sound.
- Right Side:
- Examine the internal and external repairs visible on the side wall.
- Check for any abnormal repairs on the cross members or rails.
- Tap the right wall with a small hammer to ensure a hollow sound.
- Floor:
- Measure the height from the bottom to the top to ensure compliance with specifications.
- To determine the level of cleanliness, check for any residue or pollutants and assess whether there is any extra moisture present. If any of these issues are detected, it is important to clean them promptly.
- Check for any abnormal repairs.
- Confirm that the bottom is flat and all heights are the same.
- Ceiling/Roof:
- The shape of the top should be consistent, neither concave nor convex.
- Examine the top corner blocks and their distance from the top. Normally, the top should be slightly lower or aligned with the top of the corner blocks.
- Check for any abnormal repairs.
- Confirm that the exhaust vent is visible and not obstructed by foreign objects.
- Doors (Inside / Outside):
- Ensure the reliability and safety of the door hardwares system.
- Ensure there are no solid foreign matter in the holes.
- Check the type and color of rivets, prevent block or oil stains around them.
- Under carriage:
- Prior to container loading, inspect it's chassis and exterior.
- Use a mirror to check the chassis and ensure all supporting cross beams are visible, with no external objects attached to the landing gear.
- Inspect visible external repairs from inside the container.
- Tap the exterior with a hammer to ensure a hollow sound.
In conclusion, CIMC Equilink provides different types of container inspection tools, as businesses strive for excellence in the intricate world of shipping and logistics, the role of container inspection tools cannot be overstated. At CIMC Equilink, we recognize the pivotal importance of ensuring the safety, compliance, and efficiency of containerized cargo.
Our cutting-edge container inspection tools are designed to empower your operations with precision and reliability. By investing in our advanced solutions, you are not just securing cargo; you are safeguarding your reputation, minimizing risks, and maximizing efficiency.
As a leader in the industry, CIMC Equilink is committed to providing you with the tools you need to stay ahead of the curve. Our dedication to innovation and customer satisfaction sets us apart, making us the go-to partner for businesses navigating the complexities of container inspection.
Choose CIMC Equilink for an elevated standard of container inspection excellence. Contact us today to explore how our state-of-the-art tools can enhance your logistics operations, ensuring a seamless journey for your cargo from point A to point B. Trust in our expertise, and let us be your partner in shaping the future of secure and efficient containerized transport.If you are seeking to purchase these tools even other container parts, please contact us by calling at at +86 21 6686 7007 or sending the e-mail to info.equilink@cimc.com.
Share:
Quick Quote
Write an emailCannot find what you are looking for?
Write an email to us to consult about your special project, we will assist you to realize your dream product to reality
Phone: +86 21 6686 7007CIMC Intermodal Equilink Co., Ltd-Shipping container floor|Container floor|Lashing equipment|Twist Lock|20 feet container price|Modified shipping container for sale|Iso tank container price|Shipping containers for sale|Reefer container for sale|Trailer parts|Container parts|Container corner casting|Corner fitting container|Container Locking Device|Iso tank parts|Container Corner Post|Container Cross Member|Container Gasket|40 feet container price|Open top container for sale|Trailer landing gear|Trailer rims
Address: Hutai Road, No. 6415 Baoshan District, Shanghai China
Fax: +86 21 6686 7007
Email: info.equilink@cimc.com
Copyright © 2019 CIMC Equilink - Container Parts
